What Are The Techniques Used By Custom Hoodie Manufacturers.

DTG printers work by spraying ink onto the garment in small droplets. The ink used in DTG printers is water-based and has been specifically formulated for use on fabric. Once your design has been printed, it will need to undergo a curing process in order to set the ink and prevent it from washing out.

DTG printing offers a lot of advantages when compared to other methods of garment decoration. For one, DTG-printed garments have a softer hand feel than those that have been screen printed. This is because the ink penetrates deeper into the fabric fibres when it is applied via DTG printing. Additionally, DTG printing offers a wider colour gamut than screen printing, which means that your design can be printed with more accurate colours.

On the downside, DTG-printed garments are more expensive than those decorated with other methods. This is due to the fact that DTG printers are relatively new technology and thus are still quite costly. Additionally, because the ink penetrates so deeply into the fabric fibres, it can be more difficult to achieve consistent print quality across different fabrics.

Screen printing uses a mesh screen to transfer ink onto a substrate (in our case, fabric). It is also known as 'silk screening' or 'serigraphy'. Screen printing is one of the oldest methods of printmaking, dating back to Song Dynasty China (960-1279 CE).

Hoodies are manufactured using a few different methods, but screen printing is the most popular. The first step is creating the design. This can be done by hand or by using software like Adobe Photoshop or Illustrator. Once the design is finalized, it's transferred onto a transparent film.

After the design is transferred, it's time to create the screen. A piece of finely woven mesh is stretched over a frame and then coated with a light-sensitive emulsion. Once the emulsion dries, it's placed over the transparency with the design side down. Then, both are exposed to UV light, which hardens the emulsion everywhere except for where the design appears on the transparency.

The final step is aligning the screen on the fabric and printing the design. The screen and fabric are placed on top of each other and pulled tight. Ink is then pushed through the screen onto the fabric using a squeegee. After one colour has been printed, the process begins again with a new screen for the next colour. When all colours have been printed, the ink needs to cure so that it doesn't wash out in future washes.

Reflective print is a technique that uses special inks and papers to create a design that reflects light in low-light conditions. This technique is often used for safety garments such as hi-visibility jackets and vests. Reflective prints can be more expensive than other methods due to the cost of reflective ink and paper.

Reflective print starts with a design that is printed onto specialised transfer paper using an inkjet printer. The transfer paper is then placed on the fabric of the hoodie and covered with a piece of parchment paper. The entire assembly is then placed into a heat press, which applies high temperatures to the transfer paper.

This causes the inks to turn into gas, penetrating the fabric fibres and bonding with them. The heat also activates the reflective properties of the ink, causing the design to reflect light in low-light conditions. After a few minutes in the heat press, the parchment paper is removed, and the fabric is allowed to cool. The design will be permanently bonded to the fabric and will not wash out.

Flocking is a technique that uses heat and pressure to attach short lengths of fibre to the surface of the hoodie. This technique can add texture and depth to your design, making it stand out from other printed hoodies. However, flocking can be more expensive than other methods due to the cost of the flock material.

Flocking starts with a design that is printed onto specialised transfer paper using an inkjet printer. The transfer paper is then placed on the fabric of the hoodie and covered with a piece of parchment paper. The entire assembly is then placed into a heat press, which applies high temperatures and pressure to the transfer paper.

This causes the inks to turn into gas, penetrating the fabric fibres and bonding with them. The heat and pressure also cause the flock material to adhere to the design. After a few minutes in the heat press, the parchment paper is removed, and the fabric is allowed to cool. The design will be permanently bonded to the fabric and will not wash out.

Tie dye is a technique that uses coloured dyes to create patterns on fabric. This technique can add a unique and vibrant look to your hoodie design. However, tie dye can be more expensive than other methods due to the cost of the dyes.

Tie dye starts with a design that is printed onto specialised transfer paper using an inkjet printer. The transfer paper is then placed on the fabric of the hoodie and covered with a piece of parchment paper. The entire assembly is then placed into a heat press, which applies high temperatures to the transfer paper.

This causes the inks to turn into gas, penetrating the fabric fibres and bonding with them. The heat also activates the coloured dyes, causing them to bleed into the fabric and create patterns. After a few minutes in the heat press, the parchment paper is removed, and the fabric is allowed to cool. The design will be permanently bonded to the fabric and will not wash out.

Acid washing is a technique that uses chemicals to create a distressed look on fabric. This technique can add a vintage or edgy look to your hoodie design. However, acid washing can be more expensive than other methods due to the cost of the chemicals.

Acid washing starts with a design that is printed onto specialised transfer paper using an inkjet printer. The transfer paper is then placed on the fabric of the hoodie and covered with a piece of parchment paper. The entire assembly is then placed into a heat press, which applies high temperatures to the transfer paper.

This causes the inks to turn into gas, penetrating the fabric fibres and bonding with them. The heat also activates the chemicals, causing them to eat away at the fabric and create a distressed look. After a few minutes in the heat press, the parchment paper is removed, and the fabric is allowed to cool. The design will be permanently bonded to the fabric and will not wash out.

Heat transfer printing is a technique that uses heat to transfer an image onto fabric. This technique can add a full-colour image to your hoodie design. However, heat transfer printing can be more expensive than other methods due to the cost of the transfer paper.

Heat transfer printing starts with a design that is printed onto specialised transfer paper using an inkjet printer. The transfer paper is then placed on the fabric of the hoodie and covered with a piece of parchment paper. The entire assembly is then placed into a heat press, which applies high temperatures to the transfer paper.

This causes the inks to turn into gas, penetrating the fabric fibres and bonding with them. The heat also activates the dyes, causing them to bleed into the fabric and create an image. After a few minutes in the heat press, the parchment paper is removed, and the fabric is allowed to cool. The design will be permanently bonded to the fabric and will not wash out.